Neon America
October 30, 2020, 04:34:56 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Updated the Tech section of the site to include the TDC's (Diagnostic Trouble Codes) for ALL Neon's and SRT-4's. 1995-1999 and 2000-2005.
 
    Home   Help Login Register  
Pages: [1]
  Send this topic  |  Print  
Author Topic: crankshaft question  (Read 548 times)
evan wilson
Online Member
*
Posts: 4


Email
« on: January 21, 2007, 05:07:38 PM »

k my 97 dohc spun a rod bearing, and pry many people know on this site that I've been looking 4 a motor, but i may have found an alternative. Can I replace the crankshaft and the spun rod bearing? I can buy a rod bearing for $30 or $40 a someone in my state is selling me a crankshaft. so i was wandering, R my problems solved or are the still somethings left unfinished that i would nee to have my neon running back to normal again?
Logged
Northern
Administrator
Online Member
*****
Posts: 2



Email
« Reply #1 on: January 22, 2007, 03:32:52 AM »

Quote

edub20 wrote:
k my 97 dohc spun a rod bearing, and pry many people know on this site that I've been looking 4 a motor, but i may have found an alternative. Can I replace the crankshaft and the spun rod bearing? I can buy a rod bearing for $30 or $40 a someone in my state is selling me a crankshaft. so i was wandering, R my problems solved or are the still somethings left unfinished that i would nee to have my neon running back to normal again?


Its all on how bad the bearing spun, if it scared the crank, then you need the crank re finished, and oversized bearings put in., if the crank is fine you should beable to just put a fresh set of bearing in....( with the correct torq, lube, oil, ect )
Logged
Pages: [1]
  Send this topic  |  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.12 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!